Objective The objective of this study was to evaluate the root canal morphology of third molars in the Bosnia-Herzegovina population. Materials and methods A total of 241 extracted third molars (105 maxillary and 136 mandibular) were subjected to a clearing procedure. The specimens were categorized into ten groups based on the Alavi classification for maxillary third molars (MaxTMs), and six groups were based on the Gulabivala classification for mandibular third molars (ManTMs). Root canal type according to the Vertucci classification, the presence and position of lateral canals, and intercanal communication were analyzed using a stereomicroscope x15. Results MaxTMs had three roots in 77.13% of the samples. Among MaxTMs, the most common morphology was three fused roots (33.33%) and Vertucci’s type VIII (54. 28% of samples in Alavi’s Group IV). 60.29% of ManTMs have two separate roots (Gulabivala's Groups II and III). The most prevalent types in mesial roots were type I (41.46% in Group II) and type IV (48.78% in Group III), although type I predominated in distal roots (91.24% and 100% in Groups II and III, respectively). Conclusion Single-rooted third molars usually have a root canal morphology that is more favorable for endodontic treatment. In contrast, third molars with fused roots often have more complex root canal morphology.

Objective. This study aimed to analyze the crown and root morphology of maxillary and mandibular third molars, and assess their position in relation to adjacent anatomical structures using clinical examination and radiographic images. Materials and Methods. A total of 176 extracted impacted or partially impacted third molars were included in this study. Orthopantomogram images (OPG) were used to evaluate the number of roots, position, depth of impaction relative to the occlusal plane of the second molar, and angulation of maxillary and mandibular third molars. The extracted teeth were examined to determine the actual number of roots. The root morphology was classified using the Alavi classification system for maxillary third molars and the Machado classification for mandibular third molars. Additionally, the number of cusps, crown dimensions, and morphology were analyzed using digital and dental calipers. Results. The extracted samples exhibited a significantly higher number of roots compared to the number assessed on OPG images (P<0.001). The majority of mandibular third molars had two fused roots (37.39%) and a five-cuspid crown (48.70%), while maxillary third molars had three fused roots (26.23%) and four cusps (42.62%). Both maxillary (60.66%) and mandibular third molars (61.74%) were predominantly vertically positioned. Regarding the depth of impaction, maxillary third molars were primarily classified as Class C (65.57%), while mandibular third molars were classified as Class B (47.83%). Differences in crown shape were observed, with maxillary crowns being mostly triangular (36.07%) and mandibular crowns being oval (38.26%). Maxillary third molars had shorter crowns compared to mandibular third molars (P<0.05). Conclusion. The root morphology of maxillary and mandibular third molars in the population of Bosnia and Herzegovina displays variability. Orthopantomogram imaging was found to be inadequate for accurate determination of the number of roots in third molars. The number of cusps on third molars cannot be relied upon as a predictor of the number of roots. The study’s findings will have implications for dental practice, particularly for oral surgeons and restorative dentists.

Introduction: Composite materials may be exposed to chemicals in food and beverages in the oral cavity, which can lead to changes in surface roughness. The aim of this in vitro study was to evaluate the surface roughness of two restorative materials after exposure to coffee and green tea followed by a dental bleaching procedure. Methods: For nanofilled composite and microhybrid composite, 15 samples each were fabricated. Five specimens from each composite were stored in instant coffee and green tea for 4 h a day. After 30 days of immersion, specimens received dental at-home bleaching, using 16% carbamide peroxide (CP), for 7 h a day. The control group was stored in deionized water for 30 days. Surface roughness was determined by profilometry 24 h after polymerization, after 30 days of immersion, and after bleaching. The data were analyzed using a t-test for paired samples and mixed analysis of variance, at a 0.05 significance level. Results: Neither beverages nor CP treatment significantly altered the surface roughness of the composites. There was no difference between the tested composite materials regarding roughness. Conclusion: Surface roughness of the microhybrid and nanohybrid composites was not modified by coffee, green tea, and subsequent whitening treatment.

Introduction: Dental fear and anxiety (DFA) is a ubiquitous entity among dental patients in terms of their prevalence and incidence. It is among the major clinical problems in dentistry. In addition, the differences in DFA prevalence were present considering the age and gender of patients and over time, but with some opposite reports. The aim of this study is to examine the prevalence of DFA presence in children concerning their age, gender, and over time. Methods: The survey sample comprised 200 of 9–12-year-old children. The DFA presence was determined twice by the modified version of the CFSS-DS scale (CFSS-DS-mod scale) during a 6-months long period between the first and the subsequent dental appointment due to the need for restorative dental treatment. The scale was applied before the restorative treatment started on both occasions. Results: The prevalence of DFA was 17.5% in the study sample and decreased over time. It was slightly higher in girls. Conclusions: The DFA prevalence in 9–12-year-old children is decreasing over time. Latent manifestations of DFA presence should be considered for evaluation in the future.

Background: Supernumerary teeth (ST) represent one of the most common developmental anomalies among humans. Objective: In this study, we set a goal to investigate ST prevalence in the Bosnian and Herzegovinian population along with characteristics and complications that ST can cause. Methods: This retrospective study was based on panoramic radiographs, CBCT images, and dental records. Analyzed ST characteristics were: type, morphology, location, eruption state, location in the arch, orientation, and associated clinical complications. Statistical analysis included univariate analysis and bivariate analysis using Fisher’s exact test with a confidence interval of 95% (p<0.05). Results: On a sample of 10.237 patients, ST teeth appear in 100 patients with a prevalence of 0.98%. Out of 138 analyzed ST mesiodens was the most frequent (43.47%). The most common location of the ST was maxilla (77.53%). The majority of ST were impacted (90.5%) but with no complications (71.7%). There was statistically significant relationship (p<0.001) between the type of ST and location (mesiodens and distomolars were mostly found in the maxilla). The relationship between ST type and morphology was also statistically significant (p<0.001)–mesiodens was associated with conical morphology, parapremolar with supplementary, and distomolar with tuberculate morphology. The occurrence of ST-associated retention of adjacent teeth was correlated to the type of tooth (p<0.001) Conclusion: The present study found prevalence of ST in B&H population to be low. Although associated pathology was not high early diagnosis allows optimal patient management which reduces later complications.

Background: In the academic world, the debate continues on the subject of how far a lack of vitamin D can affect the healing of various wounds. Objective: To determine if basal serum levels of vitamin D significantly influence clinical parameters linked to post-extraction wound healing after surgical removal of impacted/semi-impacted third molars. Methods: A total of 23 patients were included in this study. Clinical outcome parameters were: edema, trismus, pain, soft tissue healing, and dry socket signs. The research was divided into four stages. Results: Due to the high prevalence of hypovitaminosis D (91%), patients were classified into an insufficient (≥ 20 ng/ml) or a deficient group (<20 ng/ml). The results showed no statistically significant differences in pain, edema, trismus, or soft tissue healing between those two groups. A slight statistical interaction was observed in the clinical parameters related to edema and trismus assessment, but not statistically significant. We did not notice signs of “dry socket” on any of the patients. Conclusion: Within its limitations (low number of patients, high prevalence of vitamin D deficiency), this pilot study failed to find a significant influence of serum vitamin D concentrations in wound healing or post-surgery symptom (pain, edema, trismus) development after third molar extraction. Further clinical investigations are necessary to elaborate on this function of vitamin D more precisely.

Objectives Oral health in children is additionally burdened with the presence of dental fear and anxiety (DFA). These clinical psychologic entities in their progressive stages inevitably lead to avoidance of dental appointments, which makes prevention and therapy of oral diseases more difficult. Upon the onset of DFA in general, as one of the emotional outcomes of stress in a dental office, most children patients could define the specific stressors that were most intense for them, which could predict the presence of DFA. Aim To examine the predictors of DFA presence in 9-12-year-old children, and investigate how they could explain the DFA occurrence in study participants. Material and Methods The sample consisted of 200 children aged from 9 to 12 years. The DFA presence was determined by the modified version of the CFSS-DS scale. The child's behavior in the dental office during the treatment was evaluated by the trained observer using Venham anxiety and behavior rating scales. Socioeconomic status, characteristics of dental office visits, and previous caries experience were also analyzed. Results The main DFA predictors were related to invasive dental treatments, where the behavior during dental treatment was the most accurate expression of the DFA appearance. Conclusions Invasive dental procedures are the main stressful factor for DFA occurrence. Predisposing factors could strengthen the DFA occurrence.

Objectives The study aimed to compare the color stability of two different light-cured composites after immersion in three liquids and the effectiveness of 16% carbamide peroxide (CP) in removing the discoloration. Material and methods Color stability of a microhybrid (Z250, 3M ESPE) and nanocomposite (Z550, 3M ESPE) was evaluated after immersion in instant coffee, tea, Coca-Cola, and deionized water as a control group (n=5). Samples were kept in liquids for four hours daily at 37°C for 30 days. Furthermore, 16% CP was applied for the following 14 days, simulating night whitening. A digital spectrophotometer was used for color measurement based on the CIEL*a*b* color coordinates. The color changes (∆E) were measured at baseline, after immersion in the beverages, and also after the teeth whitening procedure. Mixed and factorial ANOVA followed by Bonferroni’s post-hoc test were used for statistical evaluation (p≤0.05). Results Tested resin composites showed a color change over the acceptability threshold (ΔE*> 3.48) after immersion in coffee and tea. Nanocomposite reported a significant increase in discoloration in coffee after 30 days (p <0.05). The color of both materials significantly changed (p<0.05) along all three L*a*b* axes in coffee and tea to darker, yellow, and red. Whitening with 16% CP was effective in removing external discoloration in both examined composite materials. Conclusion Coffee and tea induced clinically detectable color changes in dental composites tested, with cumulative effects. Whitening represents an efficient method for the removal of surface discoloration in composite restorations.

OBJECTIVES To test the influence of a bleaching procedure using 16% carbamide peroxide (CP) on the colour of composite materials and their consecutive subjection to discolouration in beverages. MATERIALS AND METHODS Nanocomposite Z550 (3M ESPE) and the microhybrid Z250 (3M ESPE) composite materials were selected for the research. 16% CP was applied to composite plates (15 samples each material) for seven hours a day for 14 days simulating at-home nightguard vital bleaching. The test samples were then divided randomly into three sub-groups and submerged in instant coffee, green tea and Coca Cola for 30 days. The control group (N=5) samples were kept in deionized water. Determination of the L*a*b* dimensions of colour of the polymerized discs was performed by calibrated spectrophotometer 24 hours later, after the bleaching procedure, and on days 7, 15 and 30 after immersion in the beverages. RESULTS After application of 16% CP, there were perceptible changes in the colour of both test materials, which did not exceed the boundaries of acceptability (ΔE<3.48). Coca-Cola did not cause discolouration of the tested composites, but coffee and tea changed their colour above the level of perceptibility already seven days after immersion. A statistically significant difference in the change in colour was established between the materials when they were immersed in coffee (P<0.05). CONCLUSIONS 16% CP does not affect the basic colour of the composites. Immersion in a beverage led to an unacceptable change in the colour of both test materials in coffee and tea, primarily towards black. The greatest discolouration after bleaching was shown by Z550 when immersed in coffee.

OBJECTIVES The goal of this study was to determine the sealing ability of MTA, Biodentine, and Fuji IX as root-end materials after ultrasonic retrograde preparation using a dye penetration method. MATERIALS AND METHODS Seventy permanent anterior teeth were used in this study. Root canals were prepared using rotary endodontic files, and obturated using the lateral condensation technique. The resection of the root apices was performed perpendicularly to the long axis, and 3 mm deep retrocavities were made by ultrasonic tips. The samples were randomly divided into three experimental groups (N=20) and two control groups (N=5). The root-end cavities were filled with mineral-trioxide aggregate (Rootdent MTA, TehnoDent, Russia) in Group 1, Biodentine (Septodont, Saint Maur des Fossés, France) in Group 2 and Fuji IX GP (GC Corporation, Tokyo, Japan) in Group 3. The retrocavities of the positive control group were left unfilled, while retrocavities in the negative control group were sealed using a flowable composite material. The samples were made transparent, and dye penetration was assessed under a stereomicroscope (x10). The data were analyzed with the Kruskal-Wallis test and the Mann-Whitney U-test. RESULTS The Biodentine group had a lower mean leakage value than the MTA and Fuji IX groups, and the difference was statistically significant (P<0.01). No statistical difference in apical microleakage was found between the MTA and Fuji IX groups (P>0.05). CONCLUSION Within the limitations of this study, it was concluded that Biodentine provides better sealing ability as a root-end material than MTA and Fuji IX. There was no statistically significant difference between the sealing ability of MTA and Fuji IX as root-end materials.

Objective : The aim of this study was to investigate the impact of inflammation on expression of MMP-2 and MMP-9, as well as to identify the cellular sources of these enzymes in human dental pulps using immunohistochemistry. Methods : Fifty-four irreversibly inflamed samples of dental pulp were used as the experimental group. Fifty-one healthy pulps, obtained from teeth extracted for orthodontic reasons, were used as the control group. The tissue samples were formalin-fixed, paraffin-embedded, and cut into sections at 3- 4 μm. An immunohistochemical study was performed using monoclonal antibodies against MMP-2 and MMP-9. Evaluation of the immunohistochemical expression was determined by the semi-quantitative method and scored as follows: no staining (score 0), less than 10% of stained cells (score 1), less than 30% of weakly stained or strongly but incompletely stained cells (score 2), and more than 30% of strongly and completely stained cells (score 3). Results : Immunohistochemical analysis revealed a significantly greater expression of MMP-9 in inflamed than in healthy dental pulps (Mann–Whitney U, p=0.0001). In contrast, there was no difference in the expression of MMP-2 between these two groups (Mann–Whitney U, p=0.907). MMP-2 and MMP-9 immunoreactivity was detected the most frequently in endothelial cells. Conclusions : MMP-9 is highly overexpressed in inflamed dental pulps. There are no differences in the expression of MMP-2 between healthy and inflammed dental pulps. Endothelial cells represent the major cellular source of MMP-9, as well as MMP-2, in healthy and inflamed dental pulps. Keywords : dental pulp, inflammation, MMP-2, MMP-9, immunohistochemistry

Introduction: The purpose of the current study was to estimate the biocompatibility of endodontic sealers with different bases on L929 mouse fibroblasts permanent cell line using Multiscan EX Spectrophotometer. Materials and Methods: Endodontics sealers used in this study were GuttaFlow (Roeko) silicone based sealer, AH plus (De Tray-DENTSPLY) epoxy resin based, Apexit (Vivadent) calcium hydroxide based and Endorez (Ultradent) methacrylate based sealer. Sealer were tested trough time, freshly mixed 24 h, 48h and 7 days after setting. Biocompatibility was determinate on permanent cell lines L929 mouse fibroblasts trough cytotoxicity using MTT assay. Level of absorption was measured with multi scan EX spectrophotometer on length 420-600 nm. Results: Sealer based on calcium hydroxide Apexit Plus, GuttaFlow silicone based sealer and AH plus epoxy resin based sealer, have shown a low cytotoxicity through the all periods of time on culture of L292 mouse fibroblasts. Methacrylate based sealer, Endorez showed moderate cytotoxicity when freshly mixed and after 7 days. After 24 hours the visibility of the cells was 74,0% and after 48 hours 65,1%. which is slightly cytotoxic. Conclusions: According to results of this study there is a statistically significant difference among the groups p<0,05 for all the tested sealers. Apexit Plus, GuttaFlow and AH plus can be considered as biocompatibile. EndoREZ sealer which is based on methacrylate, after 7 days shows 50,1% of visible live cells which is considered as moderate cytotoxicity.

Fluoride release is important characteristic of glass-ionomer cements. Quantity of fluoride ions released from the glass-ionomer cements has major importance in definition of their biological activity. The objectives of this study were to define the quantity of fluoride ions released from the experimental glass-ionomer cements and to define the effect of fluoride ions released from the experimental glass-ionomer cements on their cytotoxicity. Concentrations of the fluoride ions released in the evaluated glass-ionomer cements were measured indirectly, by the fluoride-selective WTW, F500 electrode potential, combined with reference R503/D electrode. Statistical analyses of F-ion concentrations released by all glass-ionomers evaluated at two time points, after 8 and after 24 hours, show statistically higher fluoride releases from RMGICs: Vitrebond, Fuji II LC and Fuji Plus, when compared to conventional glass-ionomer cements: Fuji Triage, Fuji IX GP Fast and Ketac Silver, both after 8 and after 24 hours. Correlation coefficient between concentrations of fluoride ion released by evaluated glass-ionomer cements and cytotoxic response of UMR-106 osteoblast cell-line are relatively high, but do not reach levels of biological significance. Correlation between concentrations of fluoride ion released and cytotoxic response of NIH3T3 mouse fibroblast cell line after 8 hours is high, positive and statistically significant for conventional GICs, Fuji Triage and Fuji IX GP Fast, and RMGIC, Fuji II LC. Statistically significant Correlation coefficient between concentrations of fluoride ion released and cytotoxic response of NIH3T3 cell line after 24 hours is defined for RMGIC Fuji II LC only.

Fluoride release is important characteristic of glass-ionomer cements. Quantity of fl uoride ions released from the glass-ionomer cements has major importance in defi nition of their biological activity. Th e objectives of this study were to defi ne the quantity of fl uoride ions released from the experimental glass-ionomer cements and to defi ne the eff ect of fl uoride ions released from the experimental glass-ionomer cements on their cytotoxicity. Concentrations of the fl uoride ions released in the evaluated glass-ionomer cements were measured indirectly, by the fl uoride-selective WTW, F electrode potential, combined with reference R/D electrode. Statistical analyses of F-ion concentrations released by all glass-ionomers evaluated at two time points, after  and after  hours, show statistically higher fl uoride releases from RMGICs: Vitrebond, Fuji II LC and Fuji Plus, when compared to conventional glass-ionomer cements: Fuji Triage, Fuji IX GP Fast and Ketac Silver, both after  and after  hours. Correlation coeffi cient between concentrations of fl uoride ion released by evaluated glass-ionomer cements and cytotoxic response of UMR- osteoblast cell-line are relatively high, but do not reach levels of biological signifi cance. Correlation between concentrations of fl uoride ion released and cytotoxic response of NIHT mouse fi broblast cell line after  hours is high, positive and statistically signifi cant for conventional GICs, Fuji Triage and Fuji IX GP Fast, and RMGIC, Fuji II LC. Statistically signifi cant Correlation coeffi cient between concentrations of fl uoride ion released and cytotoxic response of NIHT cell line after  hours is defi ned for RMGIC Fuji II LC only. ©  Association of Basic Medical Sciences of FB&H. All rights reserved

Resumen pt: Objeti vo: Determinar a incidencia de carie de radiacao em pacientes com câncer de cabeca e pescoco na populacao Bosnia. Metodo: Trinta pacientes com dia...