Introduction: Many studies have examined values of crestal bone loss according surgical techniques, time of implant placement (immediate post-extraction or after alveolar socket healing), platform switching or convectional platform, surface of the implant, functional loading (immediate or delayed), etc. Methods: This study analyzed a total of 443 dental implants on 115 images: 161 Bredent blueSKY dental implants and 282 Ritter spiral dental implants. All images were taken at the Faculty of Dentistry of the University of Sarajevo: before implantation and after 1 year of functional loading. Crestal bone loss was measured on the mesial and distal side of each implant from the coronal portion of the abutment to the noticeable margin of the alveolar bone. Results: There is statistically significant differences between Bredent blueSKY and Ritter spiral dental implants regarding mesial (p < 0.001, df = 441, tstat = −64.22) and distal (p < 0.001, df = 441, tstat = −151.21) bone losses. Conclusion: Platform switching dental implants showed more bone loss on the mesial and distal side of implant than dental implants with conventional platform.
Background: Antimicrobial photodynamic therapy (PDT) has been introduced as a potential option for peri-implantitis treatment. The aim of this study is to evaluate the antimicrobial effect of a novel technique involving a combination of 445 nm diode laser light with 0.1% riboflavin solution (used as a photosensitizing dye) as applied on a bacterial–fungal biofilm formed on implants and to compare the performance of this technique with that of the commonly used combination of 660 nm diode laser with 0.1% methylene blue dye. Methods: An in vitro study was conducted on 80 titanium dental implants contaminated with Staphylococcus aureus (SA) and Candida albicans (CA) species. The implants were randomly divided into four groups: negative control (NC), without surface treatment; positive control (PC), treated with a 0.2% chlorhexidine (CHX)-based solution; PDT1, 660 nm (EasyTip 320 µm, 200 mW, Q power = 100 mW, 124.34 W/cm2, 1240 J/cm2) with a 0.1% methylene blue dye; and PDT2, 445 nm (EasyTip 320 µm, 200 mW, Q power = 100 mW, 100 Hz, 124.34 W/cm2, 1.24 J/cm2) with a 0.1% riboflavin dye. Results: The PDT1 and PDT2 groups showed greater reduction of SA and CA in comparison to the NC group and no significant differences in comparison to the PC group. No statistically significant differences between the PDT1 and PDT2 groups were observed. Conclusions: A novel antimicrobial treatment involving a combination of 445 nm diode laser light with riboflavin solution showed efficiency in reducing SA and CA biofilm formation on dental implant surfaces comparable to those of the more commonly used PDT treatment consisting of 660 nm diode laser light with methylene blue dye or 0.2% CHX treatment.
Objectives The study aimed to compare the color stability of two different light-cured composites after immersion in three liquids and the effectiveness of 16% carbamide peroxide (CP) in removing the discoloration. Material and methods Color stability of a microhybrid (Z250, 3M ESPE) and nanocomposite (Z550, 3M ESPE) was evaluated after immersion in instant coffee, tea, Coca-Cola, and deionized water as a control group (n=5). Samples were kept in liquids for four hours daily at 37°C for 30 days. Furthermore, 16% CP was applied for the following 14 days, simulating night whitening. A digital spectrophotometer was used for color measurement based on the CIEL*a*b* color coordinates. The color changes (∆E) were measured at baseline, after immersion in the beverages, and also after the teeth whitening procedure. Mixed and factorial ANOVA followed by Bonferroni’s post-hoc test were used for statistical evaluation (p≤0.05). Results Tested resin composites showed a color change over the acceptability threshold (ΔE*> 3.48) after immersion in coffee and tea. Nanocomposite reported a significant increase in discoloration in coffee after 30 days (p <0.05). The color of both materials significantly changed (p<0.05) along all three L*a*b* axes in coffee and tea to darker, yellow, and red. Whitening with 16% CP was effective in removing external discoloration in both examined composite materials. Conclusion Coffee and tea induced clinically detectable color changes in dental composites tested, with cumulative effects. Whitening represents an efficient method for the removal of surface discoloration in composite restorations.
OBJECTIVES To test the influence of a bleaching procedure using 16% carbamide peroxide (CP) on the colour of composite materials and their consecutive subjection to discolouration in beverages. MATERIALS AND METHODS Nanocomposite Z550 (3M ESPE) and the microhybrid Z250 (3M ESPE) composite materials were selected for the research. 16% CP was applied to composite plates (15 samples each material) for seven hours a day for 14 days simulating at-home nightguard vital bleaching. The test samples were then divided randomly into three sub-groups and submerged in instant coffee, green tea and Coca Cola for 30 days. The control group (N=5) samples were kept in deionized water. Determination of the L*a*b* dimensions of colour of the polymerized discs was performed by calibrated spectrophotometer 24 hours later, after the bleaching procedure, and on days 7, 15 and 30 after immersion in the beverages. RESULTS After application of 16% CP, there were perceptible changes in the colour of both test materials, which did not exceed the boundaries of acceptability (ΔE<3.48). Coca-Cola did not cause discolouration of the tested composites, but coffee and tea changed their colour above the level of perceptibility already seven days after immersion. A statistically significant difference in the change in colour was established between the materials when they were immersed in coffee (P<0.05). CONCLUSIONS 16% CP does not affect the basic colour of the composites. Immersion in a beverage led to an unacceptable change in the colour of both test materials in coffee and tea, primarily towards black. The greatest discolouration after bleaching was shown by Z550 when immersed in coffee.
Background According to available scientific references and textbooks, there are contradictory views concerning the etiology of signs and symptoms of TMD. Objectives The aim of this study was to determine a correlation between the incidence of signs and symptoms of TMD in children aged 12-18 who do not wear a fixed orthodontic appliance and the incidence of signs and symptoms of TMD in children who wear a fixed orthodontic appliance. Material and Methods The total number of 120 subjects were included in this survey and divided into two groups. There were 60 respondents in the experimental group that consisted of 30 boys and 30 girls with different types of malocclusion, who were treated with a fixed orthodontic straight wire technique. The remaining 60 respondents, which was a group that also consisted of 30 boys and 30 girls, were patients with neutroclusion. Results The results of the study have shown that the TMJ clicking sound symptom, the most common symptom of TMD, occurs with almost equal prevalence in both groups of respondents; specifically, 56.4% in orthodontic patients, and 46.6% in the control group respondents. A statistically significantly higher percentage of female respondents in both groups have experienced headache problems (p <0.03). Conclusion On the basis of the statistics obtained as a result of this research, we can come to the conclusion that there is no correlation between the fixed orthodontic treatment and the development of signs and symptoms of TMD.
Introduction: Dental implantology is the branch of dentistry that is gaining greater significance because a larger number of patients come with requests of implant placements. During dental implant placements, with patients with whom operation is carried out in the mandible, very frequently nervus alveolaris inferior can be injured. The nerve injury may occur during the implant placement, but the nerve may also be injured in case of harvesting of intraoral bone graft. During the bone graft harvesting, but also during any other procedure in the dentistry that entails working on vestibular side of corpus of the mandible, in order not to injure the nervus alveolaris inferior, it is important to familiarize oneself with the distance of the nerve from the outer vestibular cortex of the mandible. The objective of the study was to assess the vestibular bone thickness of the mandible in relation to the mandibular canal with the help of analysis of cone-beam computed tomography (CBCT) images.Methods: It was accessed the database of CBCT images taken at the School of Dental Medicine at the University of Sarajevo, where out of 700 reviewed CBCT images, an analysis of 322 CBCT images was conducted that satisfied inclusion criteria of the study. CBCT images were taken using of ORTHOPHOS SLX imaging unit. The measurement was conducted by Sidexis program on cross-section of CBCT image. The measurement of vestibular bone thickness was performed, by measuring the distance from the lateral wall of the mandibular canal to buccal mandibular compact bone, in the region of the second premolar, of the first and the second molar.Results: There were statistically significant differences in vestibular bone thickness between men and women on both sides in the region of the second premolar (p < 0.001) and first molar (p = 0.016 right, p = 0.018 left). T-test demonstrated no statistically significant difference in the vestibular bone thickens between men and women on either side in the case of vestibular bone thickness of the center of the second molar (p = 0.397 right, p = 0.743 left).Conclusion: Values of vestibular thickness of the mandible are larger with men than with women in all measuring points; however, statistically more significant differences between genders have been detected in the second premolar and center of the first molar.
Introduction: Dentists and generally dental personnel work under the risk of being infected by patients suffering from COVID-19, who are unaware that they are infected. The reason lies in the fact that during dental procedures, aerosol is formed with droplets that may contain the virus. Thus, it is extremely important that dental personnel complies with adequate protective measures and equipment during clinical work. The aim of this investigation was to evaluate the knowledge of COVID-19 and determine the amount of stress with dental personnel of the Faculty of Dentistry in Sarajevo, Bosnia and Herzegovina. Methods: Health care personnel of the Faculty of Dentistry with Clinics of the University in Sarajevo have been included in the research: teaching staff, clinical doctors, dental nurses and dental technicians. The research was conducted in April 2020. It was conducted by an anonymous survey that participants filled-in. Out of 157 distributed questionnaires in paper form, 134 participants responded. The questionnaire was divided into 3 parts: 1) personal data 2) knowledge of infection COVID-19 (diagnostic methods, transmission pathways, prevention measures); 3) the amount of stress (feelings and thoughts) during epidemic COVID-19 with personnel. Results: The largest number of participants (61.97%) consider that COVID-19 may be transmitted from infected to a healthy person by inhalation of droplets generated through coughing of an infected person and by direct contact with aerosol dispersed from the mouth of the infected patient during dental treatment. The largest number of participants, 80 of them (59.7%) consider that the method of nucleic acid test is used in diagnosing COVID-19. COVID – 19 had a significantly larger influence on females; they showed higher extent of concern for the claim „I hardly fall asleep because of thinking about it“, „I try not to talk on this topic“ and „In my mind appear pictures in relation to this.“ (p<0.05) Conclusion: Knowledge of COVID-19 and measures of protection of health care personnel at the Faculty of dentistry with Clinics in Sarajevo is satisfactory. The largest fear of participants was fear of unconsciously transmitting the infection on people close to them and that members of their families become infected with COVID-19.
Objectives The development of third molars can be helpful in dental age estimation of adolescents and in early adult period. We tested the repeatability and accuracy of the three dental age radiographic methods (Olze, Demirjian and Solari and Abramovitch) and evaluated which method is more useful. We also aimed at testing to find the correlation of estimated dental and chronological age by these three methods. Material and methods The orthopantomographs (OPGs) of 1007 individuals (8 - 25 years) were divided into two groups (cca 500 OPGs) - one group of OPGs has been presented with all four third molars, while another one was registered with third molar/s hypodontia. And all of OPGs were assessed, to verify the three methods (Olze, Demirjian and Solari and Abramovitch) for age estimation based on third molar development. Results There was a high Spearman's correlation coefficient between stages of development of wisdom tooth and chronological age of subjects by all these three methods. Conclusion We may recommend using third molars for assessing the dental age by Olze, Demirjian and Solari and Abramovitch dental method as well, on Bosnian and Herzegovinian population.
OBJECTIVE To evaluate and compare the solubility of three luting cements in three different solutions: distilled water and artificial saliva with different pH values (7.4 and 3.0). MATERIALS AND METHODS Resin-modified glass-ionomer cement (GC Fuji Plus) and two resin cements (Multilink Automix and Variolink II) were used. A total of 45 specimens, 15 specimens (15x1 mm) for each cement, were prepared according to ISO standard 4049:2009. The solubility of the cements was calculated by weighing the specimens before and after immersion and desiccation. Values of solubility in water (Wsl) in microgram/mm3 for each of the five specimens were calculated using the following formula (ISO 4049:2009): Wsl=(m1-m3)/V. The Mann-Whitney U nonparametric statistical method and Post hoc sample comparisons were applied. RESULTS GC Fuji Plus showed statistically significant higher solubility in comparison with Variolink II and Multilink Automix in all three solutions. In acidic artificial saliva (pH 3.0) Multilink Automix showed significantly higher values of solubility compared to Variolink II (P<0.016). By studying the effect of pH value on the solubility of GC Fuji Plus cement, significantly higher values of solubility in pH 3.0 artificial saliva were confirmed (P<0.009). The influence of the surrounding pH value on the solubility of the resin cements Multilink Automix and Variolink II was researched. No statistically significant difference was found. CONCLUSION Solubility values were mainly influenced by the proportion of hydrophilic matrix, the type and composition of filler, and the pH value of the solutions.
OBJECTIVE To evaluate the influence of gender on the mental index (MI) and the mandibular cortical index (MCI). METHODS In this study, there were 120 subjects (43 male and 77 female subjects), who had undergone a dental panoramic radiograph examination for the needs of diagnosis and future treatment planning. MI and MCI were determined by orthopantomograph. RESULTS There was a statistically significant difference in MI dependent on gender. Male patients demonstrated significantly higher values for MI than female patients (right: t=4.127; P=0.0001, left: t=3.110; P=0.002). No statistically significant difference was observed for MCI dependent on gender (right: χ²=2.36 P=0.308, left: χ²=3.85 P=0.146). CONCLUSION MI is affected by gender, but MCI is not.
Ova stranica koristi kolačiće da bi vam pružila najbolje iskustvo
Saznaj više