The Effect of Bleaching on the Basic Colour and Discoloration Susceptibility of Dental Composites.

OBJECTIVES To test the influence of a bleaching procedure using 16% carbamide peroxide (CP) on the colour of composite materials and their consecutive subjection to discolouration in beverages. MATERIALS AND METHODS Nanocomposite Z550 (3M ESPE) and the microhybrid Z250 (3M ESPE) composite materials were selected for the research. 16% CP was applied to composite plates (15 samples each material) for seven hours a day for 14 days simulating at-home nightguard vital bleaching. The test samples were then divided randomly into three sub-groups and submerged in instant coffee, green tea and Coca Cola for 30 days. The control group (N=5) samples were kept in deionized water. Determination of the L*a*b* dimensions of colour of the polymerized discs was performed by calibrated spectrophotometer 24 hours later, after the bleaching procedure, and on days 7, 15 and 30 after immersion in the beverages. RESULTS After application of 16% CP, there were perceptible changes in the colour of both test materials, which did not exceed the boundaries of acceptability (ΔE<3.48). Coca-Cola did not cause discolouration of the tested composites, but coffee and tea changed their colour above the level of perceptibility already seven days after immersion. A statistically significant difference in the change in colour was established between the materials when they were immersed in coffee (P<0.05). CONCLUSIONS 16% CP does not affect the basic colour of the composites. Immersion in a beverage led to an unacceptable change in the colour of both test materials in coffee and tea, primarily towards black. The greatest discolouration after bleaching was shown by Z550 when immersed in coffee.