The cyclic voltammogram recorded in the potential range between 0 V and 800 mV with scan rate of 100 mV s −1 was used to determine the measure of antioxidants content (antioxidant capacity) present in Sambucus nigra L. extract. The antioxidant capacity of the extract was 4.06 mg GAE g −1 fw (mg of gallic acid equivalents per gram of fresh weight of the extract). The corrosion inhibition efficiency of Sambucus nigra L. extract on aluminium, copper, and bronze in 3 % NaCl solution was studied by potentiodynamic polarization and electrochemical impedance spectroscopy. Polarization data showed that extract acted as a mixed-type inhibitor, that the corrosion inhibition process was spontaneous physical adsorption (Δ G ≈ –16 kJ mol –1 ) of the extract molecules on metals surfaces and followed Freundlich isotherm. Impedance spectroscopy studies revealed that increasing the concentration of extract reduced the double-layer capacitance and increased the charge transfer resistance. The highest inhibition efficiencies (Cu: ~ 57 %, CuSn14: ~74 % and Al: ~58 %) were achieved for an extract concentration of 1.0 g L –1 .

Plant extracts are increasingly being examined in the corrosion inhibition of metal and alloys in various environments due to their potent antioxidant properties. The use of Artemisia annua L. aqueous extract (AAE) as an aluminium alloy 5083 (ALA) corrosion inhibitor in artificial seawater (ASW) was investigated using electrochemical tests and spectroscopy tools, while the active biocompounds found in AAE were analyzed using high-performance liquid chromatography (HPLC). Electrochemical results showed that AAE acts as an anodic inhibitor through the physisorption (ΔG ≈ –16.33 kJ mol−1) of extract molecules on the ALA surface, thus reducing the active sites for the dissolution of the alloy in ASW. Fourier-transform infrared spectra confirmed that phenolic acids found in AAE formed the surface layer that protects ALA against the corrosive marine environment, while HPLC analysis confirmed that the main phytoconstituents of AAE were chlorogenic acid and caffeic acid. The inhibition action of phenolic acids and their derivatives found in the AAE was based on the physisorption of caffeic acid on the ALA surface, which improved physicochemical properties of the barrier film and/or conversion of Al3+ to elemental aluminium by phenolic acids as reducens, which slowed down the diffusion rate of Al3+ to or from the ALA surfaces. The protective effect of the surface layer formed in the presence of AAE against ASW was also confirmed by inductively coupled plasma–optical emission spectrometry (ICP-OES) whereby the measured concentration of Al ions after 1 h of immersion of ALA in the pure ASW was 15.30 μg L−1 cm−2, while after the addition of 1 g L−1 AAE, the concentration was 3.09 μg L−1 cm−2.

InxGa1−x N is a strategically important material for electronic devices given its tunable bandgap, modulated by the In/Ga ratio. However, current applications are hindered by defects caused by strain relaxation and phase separation in the material. Here, we demonstrate growth of homogeneous InxGa1−x N films with 0.3 < x < 0.8 up to ∼30 nm using atomic layer deposition (ALD) with a supercycle approach, switching between InN and GaN deposition. The composition is uniform along and across the films, without signs of In segregation. The InxGa1−x N films show higher In-content than the value predicted by the supercycle model. A more pronounced reduction of GPCInN than GPCGaN during the growth processes of InN and GaN bilayers is concluded based on our analysis. The intermixing between InN and GaN bilayers is suggested to explain the enhanced overall In-content. Our results show the advantage of ALD to prepare high-quality InxGa1−x N films, particularly with high In-content, which is difficult to achieve with other growth methods.

Considering the vast cultural and traditional heritage of the use of aromatic herbs and wildflowers for the treatment of light medical conditions in the Balkans, a comparison of the antioxidant capacity of wildflowers extracts from Herzegovina was studied using both cyclic voltammetry and spectrophotometry. The cyclic voltammograms taken in the potential range between 0 V and 800 mV and scan rate of 100 mV s−1 were used for the quantification of the electrochemical properties of polyphenols present in four aqueous plant extracts. Antioxidant capacity expressed as mmoL of gallic acid equivalents per gram of dried weight of the sample (mmoL GAE g−1 dw) was deduced from the area below the major anodic peaks (Q400 pH 6.0, Q500 pH 4.7, Q600 pH 3.6). The results of electrochemical measurements suggest that the major contributors of antioxidant properties of examined plants are polyphenolic compounds that contain ortho-dihydroxy-phenol or gallate groups. Using Ferric reducing-antioxidant power (FRAP) and 2,2′-azino-bis spectrophotometric methods (3-ethylbenzthiazoline-6-sulphonic acid) radical cation-scavenging activity (ABTS) additionally determined antioxidant capacity. The FRAP results ranged from 2.9702–9.9418 mmoL Fe/g dw, while the results for ABTS assays expressed as Trolox equivalents (TE) ranged from 14.1842–42.6217 mmoL TE/g dw. The Folin–Ciocalteu procedure was applied to determine the total phenolics content (TP). The TP content expressed as Gallic acid equivalents (GAE) ranged from 6.0343–9.472 mmoL GAE/g dw. The measurements of total flavonoid (TF) and total condensed tannin (TT) contents were also performed to obtain a broader polyphenolic profile of tested plant materials. Origanum vulgare L. scored the highest on each test, with the exception of TT content, followed by the Mentha × piperita L., Artemisia annua L., and Artemisia absinthium L., respectively. The highest TT content, expressed as mg of (−)catechin equivalents per gram of dried weight of sample (mg CE/g dw), was achieved with A. absinthium extract (119.230 mg CE/g dw) followed by O. vulgare (90.384 mg CE/g dw), A. annua (86.538 mg CE/g dw) and M. piperita (69.231 mg CE/g dw), respectively. In addition, a very good correlation between electrochemical and spectroscopic methods was achieved.

The corrosion behavior of copper, tin, and bronze CuSn14 is studied in simulated acid rain (pH 4.5) by electrochemical techniques, cyclic voltammetry and electrochemical impedance spectroscopy. The potentiodynamic formation of anodic oxide film on copper and tin is described in terms of high‐field model. Cyclic voltammetry shows that dissolution of bronze is higher than of pure copper metal in acid rain. Electrochemical impedance spectroscopy data reveal that oxide films formed on copper and tin have a higher resistance and suppressed diffusion process through the surface layer than the oxide film formed on bronze CuSn14 at the same conditions.