Background: A precise three-point shot (3S) is considered a key parameter of success in a basketball game, and therefore the factors that affect its success have always attracted the attention of researchers. Aim: The aim of this research was a biomechanical-mathematical analysis of 3S in basketball, in order to determine the key parameters for performing a 3S. Results: The research shows a model of shooting a basketball player from the central position of the shot with 6.75 m. The modeling led to the conclusion that the height of the throw, the speed and the angle of the throw of the ball have a positive and direct relationship with the angle at which the ball falls into the basket when it comes to a shot for three points. Conclusion: The height of the throw, the speed and the angle of the ball have a positive and direct relationship with the angle at which the ball hits the basket when it comes to a shot for three points. Anthropometric characteristics of the player, such as the length of the arm, and the height of the player, directly lead to a positive relationship with the throwing angle.

Aim To determine the effect of the load on the meniscus in relation to a different angle, and to present the impact of force on eventual injury of menisci. Methods Research included 200 males with average height of 178.5 cm, mass 83.5 kg, and average age of 22 years. The simulation of treadmill that was used in the evaluation of ischemic heart disease was made. Effects on the knee were evaluated by measuring at different inclinations (5°70', 6°80', 7°90', 9°10', 10°20', 11°30' and 12°40'). Results With increasing ascent of treadmill the load on the meniscus also increased. Each increase in ascent after 22% (which corresponded to the angle of 12°40' and seventh degree of load according to the Bruce protocol) at given anthropological values was an etiological factor for meniscus injury. Conclusion The seventh degree of load according to the Bruce protocol can lead to the meniscus injury.

Introduction: Mathematical modeling of coronavirus disease spread and computer simulations are currently one of the main tools in public health that can give important indicators for prevention planning. Based on mathematical projections and daily updates of information, the measures are either tightened or reduced, in order to protect the health of the population. Aim: The aim of this paper is to present a computer system based on an adequate mathematical model that allows frequent execution of various scenarios of spread severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in any period in the future. Also, the aim of this article is to point out the importance of measures for the prevention of coronavirus disease 2019 (COVID-19) in Bosnia and Herzegovina through examples of computer simulation models. Methods: Software solution based on the USLIRD model (Unpopulated - Susceptible - Latent - Infectious - Recovered - Deceased) was developed, with a number of variable parameters ‘reproduction number, delay period, infectivity period, hospital capacity, characteristics of population). By setting these parameters in accordance with the existing and available data, the model is brought to an optimized state with the possibility of a realistic assessment of the course of the infection curve in any future period. Data from the beginning of the pandemic are collected at the Faculty of Mechanical Engineering, University of Sarajevo and updated several times a day. The set of measures is divided into two types. 'Intervention 1' is a measure to close institutions that are at high risk for pandemics, working from home, wearing face mask, enhanced hygiene when entering facilities with a larger number of people. 'Intervention 2' presents restrictive measures that has been introduced as mandatory in Bosnia and Herzegovina. The period 01.03.2020 to 01.09.2020 was observed. Results: Without epidemiological measures, Bosnia and Herzegovina's health system would quickly collapse. Restrictive measures reduce the intensity of the spread of the infection, save human lives and keep the health system functional, but with consequences on other aspects of society - reduction of economic activities, collapse of the service industry and companies and disorders in mental health status of the population. Four different scenarios of the situation were analyzed. Scenario number three is current condition with measures that are currently in Bosnia and Herzegovina. The reintroduction of restrictive measures leads to a decrease in the number of infected population and suppression of the spread of the pandemic, which is shown in scenario 4. Conclusion: Self-discipline, adherence to measures, while trying to avoid restrictive measures should be the way to fight the COVID-19 pandemic. Whatever the consequences, the initiation of restrictive measures to preserve the health of the population should be imperative.

© The Author(s) 2020. Published by ARDA. Abstract Background: The subject of this research is the creation of an optimal school bench design with the aim of determining the most favorable posture of students while sitting, taking into account the relevant ergonometric and biomechanical characteristics of the human body. For the proposed model of the school bench which allows adjusting the different slopes of its surface, the corresponding computer model of the student and the table was first created, and then biomechanical and RULA analysis was performed in order to determine the maximum load in the lumbar part. Next, for each test subject of given weight, it was necessary to determine the amount of maximum load in lumbar zone L3/L4 for different slope angles and to determine the critical angles at which the maximum permissible load of 3400 N is reached.

Background: The use of trolleys for transporting the patients and lifting and lowering them in the trolley is a repeated activity in the daily work of a nurse, and a very common cause of the load of the lumbosacral part of the spine and the consequent pathological deformity, and the onset of clinical symptomatology of painful lumbo-sacral syndrome. The high level of excessive biomechanical stress is associated with the established practice of using standard medical wheelchairs to move patients inside the hospital. The process itself depends on the characteristics of the patient, his or her weight, as well as his/her cooperativeness, but primarily depends on the nurse's mobility. Although nurses strive to be in a position that reduces the load on the lumbosacral part of the spine during practice, this is often impracticable due to the patient's inconsistency. Objective: To present the ergonomic analysis of the medical nurse's workplace while lifting the patient into the wheelchair and to display solution for improving working conditions and prevention of musculoskeletal disorders. Results: By ergonomic module of this software, we got results that present load on lumbosacral region of spine of medical nurses during their daily activities, especially in the position of lifting and lowering patients. It was concluded that maximal spinal loading decreases significantly and becomes less than critical (3,100 N) in the case of a wheelchair that has ability to automatically lift and lower patient. Conclusions: The use of hospital wheelchairs with an mechanism for the automatic lifting and lowering of patients and with a sliding seat will reduce the load on the lumbosacral region of the spine, prevent the onset of lumbosacral pain syndrome, facilitates work for the medical nurse and allows nurse to handle the patient on her own. The prevention of lumbosacral pain syndrome improves the quality of work of the nurse and extends the working life. Use of this type of wheelchair is justified in terms of cost-benefit analysis.

Cardiopulmonary exercise monitoring is a valuable method not only for the evaluation of medical health, but also for the assessment of patients with cardiac or pulmonary dysfunction. Spiroergometry provides additional criteria for the assessment of cardiopulmonary efficiency compared to simple ergometry. Maximal oxygen consumption (VO2max) is the most critical variable during spiroergometry. Most submaximal exercise measures provide the heart rate (HR) response to predetermined workloads in equations or nomograms used to predict VO2max. According to previous studies, the heart rate is divided into five fields. In this paper, we are doing a new redistribution of heart rates-to-workloads into seven fields, corresponding to the ergo bar. In other words, an answer is given based on the initial anthropological values of the subjects, when and in which field there will be a mismatch between the lung capacity of the subjects and the power required for that field.

The aim of the paper was to examine the effect of noise on the blood flow velocity through a period of three years on workers who work on press machine. It was proven that continuous exposure to noise affects the blood flow velocity through the aorta and increases the diameter of ascending aorta and this, consequently, leads to an increase in cardiovascular risk. Prevention of changes in the cardiovascular system is considered to be imperative, and the limitation of noise levels and the length of exposure to noise must be established as factors that must be planned during the construction of the work environment.

Introduction: Mathematical modeling of coronavirus disease spread and computer simulations are currently one of the main tools in public health that can give important indicators for prevention planning Based on mathematical projections and daily updates of information, the measures are either tightened or reduced, in order to protect the health of the population Aim: The aim of this paper is to present a computer system based on an adequate mathematical model that allows frequent execution of various scenarios of spread severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in any period in the future Also, the aim of this article is to point out the importance of measures for the prevention of coronavirus disease 2019 (COVID-19) in Bosnia through examples of computer simulation models Methods: Software solution based on the USLIRD model (Unpopulated - Susceptible - Latent - Infectious - Recovered - Deceased) was developed, with a number of variable parameters 'reproduction number, delay period, infectivity period, hospital capacity, characteristics of population) By setting these parameters in accordance with the existing and available data, the model is brought to an optimized state with the possibility of a realistic assessment of the course of the infection curve in any future period Data from the beginning of the pandemic are collected at the Faculty of Mechanical Engineering, University of Sarajevo and updated several times a day The set of measures is divided into two types 'Intervention 1' is a measure to close institutions that are at high risk for pandemics, working from home, wearing face mask, enhanced hygiene when entering facilities with a larger number of people 'Intervention 2' presents restrictive measures that has been introduced as mandatory in Bosnia The period 01 03 2020 to 01 09 2020 was observed Results: Without epidemiological measures, Bosnia's health system would quickly collapse Restrictive measures reduce the intensity of the spread of the infection, save human lives and keep the health system functional, but with consequences on other aspects of society - reduction of economic activities, collapse of the service industry and companies and disorders in mental health status of the population Four different scenarios of the situation were analyzed Scenario number three is current condition with measures that are currently in Bosnia The reintroduction of restrictive measures leads to a decrease in the number of infected population and suppression of the spread of the pandemic, which is shown in scenario 4 Conclusion: Self-discipline, adherence to measures, while trying to avoid restrictive measures should be the way to fight the COVID-19 pandemic Whatever the consequences, the initiation of restrictive measures to preserve the health of the population should be imperative © 2020 All Rights Reserved