This paper investigates the possibility of classifying power system dynamics events using discrete wavelet transform (DWT) and a neural network (NN) by analyzing one variable at a single network bus. Following a disturbance in the power system, it will propagate through the system in the form of low-frequency electromechanical oscillations (LFEOs) in a frequency range of up to 5 Hz. DWT allows the identification of components of the LFEO, their frequencies, and magnitudes. After determining the energy components' share of the analyzed signal using DWT and Parseval's theorem, the input data for the classification process using a NN are obtained. A total of 5 classes of disturbances, 3 different wavelet functions, and 2 different variables are tested. Simulation results show that the proposed approach can classify different power disturbance types efficiently, regardless of the choice of variable or wavelet function.

In this paper, the wavelet phase difference (WPD) approach is applied for the identification of power system areas with coherent generator groups. This approach allows observation, at different frequency bands, of movement of low frequency electromechanical oscillations (LFEO), identified at different parts of the power system and the identification of the inter-area components that move or do not move together. An illustration of the applied approach was performed on the New England (NE) 39-bus test system. The interesting results of WPD application are also presented in a real wide-area measurement data from European interconnected power system. By using the discrete wavelet transform (DWT) and Hilbert-Huang transform (HHT), the validation of results from WPD approach is also given.

Abstract: In this paper, the results of correlations between air temperature and electricity demand by linear regression and Wavelet Coherence (WTC) approach for three different European countries are presented. The results show a very close relationship between air temperature and electricity demand for the selected power systems, however, the WTC approach presents interesting dynamics of correlations between air temperature and electricity demand at different time-frequency space and provide useful information for a more complete understanding of the related consumption. Key words: power system, electricity demand, air temperature, linear regression, wave-let coherence 1. Introduction The electric power system is a very complex system. It is composed of a large number of different elements such as generators, lines, transformers, etc., but it also has a lot of different consumption categories such as household, industrial, transportation, and others. Short, me-dium or long-term planning requires thorough understanding of consumption characteristics which are defined by their load curves. The load curves represent characteristics of the power system’s load variability as a function of time, and their analysis can be performed for some customer groups, some geographic areas or the power system as a whole, where it is very important to identify the main factors affecting the consumption of electricity, such as growth and structure of Gross Domestic Product (GDP), demographic change, housing standard, the

Abstract This paper discusses the problem of finding the optimal network topological configuration by changing the feeder status. The reconfiguration problem is considered as a multiobjective problem aiming to minimize power losses and total interruptions costs subject to the system constraints: the network radiality voltage limits and feeder capability limits. Due to its complexity, the metaheuristic methods can be applied to solve the problem and often the choice is genetic algorithm. NSGA II is used to solve the multiobjective optimization problem in order to get Pareto optimal set with possible solutions. The proposed method has been tested on real 35 kV distribution network. The numerical results are presented to illustrate the feasibility of the proposed genetic algorithm. Keywords radial distribution network, multiobjective optimization, reconfiguration, genetic algorithms, NSGA II

In this paper, the relationship between the Gross Domestic Product (GDP), air temperature variations and power consumption is evaluated using the linear regression and Wavelet Coherence (WTC) approach on a 1971-2011 time series for the United Kingdom (UK). The results based on the linear regression approach indicate that some 66% variability of the UK electricity demand can be explained by the quarterly GDP variations, while only 11% of the quarterly changes of the UK electricity demand are caused by seasonal air temperature variations. WTC however, can detect the period of time when GDP and air temperature significantly correlate with electricity demand and the results of the wavelet correlation at different time scales indicate that a significant correlation is to be found on a long-term basis for GDP and on an annual basis for seasonal air-temperature variations. This approach provides an insight into the properties of the impact of the main factors on power consumption on the basis of which the power system development or operation planning and forecasting the power consumption can be improved.

In this paper, the simulation of the disturbance propagation through a large power system is performed on the WSCC 127 bus test system. The signal frequency analysis from several parts of the power system is performed by applying the Wavelet Transf orm (WT). The results show that this approach provides the system operators with some useful information regarding the identification of the power system low-frequency electromechanical oscillations, the identification of the coherent groups of generators and the insight into the speed retardation of some parts of the power system. The ability to localize the disturbance is based on the disturbance propagation through the power system and the time-frequency analysis performed by using the WT is presented along with detailed physical interpretation of the used approach.

Wavelet transform (WT) represents a very attractive mathematical area for just more than 15 years of its research in applications in electrical engineering. This is mainly due to its advantages over other processing techniques and signal analysis, which is reflected in the time-frequency analysis, and so it has an important application in the processing and analysis of time series. In this paper, for example, the analysis of the hourly load of a real power system over the past few years was performed by applying the continuous WT and using the Morlet wavelet function. The results show that this approach of data analysis can give a better insight into the basic characteristics of the consumption and identify the characteristic periods of the power system load variances over the past years, which can be very interesting for power system planners.

Power system is a complex, dynamic system, composed of a large number of interrelated elements. Its primary mission is to provide a safe and reliable production, transmission and distribution of electrical energy to final consumers, extending over a large geographic area. It comprises of a large number of individual elements which jointly constitute a unique and highly complex dynamic system. Some elements are merely the system's components while others affect the whole system (Machowski, 1997). Securing necessary level of safety is of great importance for economic and reliable operation of modern electric power systems.

Ibrahim Omerhodzic1, Samir Avdakovic2, Amir Nuhanovic3, Kemal Dizdarevic1 and Kresimir Rotim4 1Clinical Center University of Sarajevo, Department of Neurosurgery, Sarajevo 2EPC Elektroprivreda of Bosnia and Herzegovina, Sarajevo 3Faculty of Electrical Engineering, University of Tuzla, Tuzla 4University Hospital “Sisters of Charity”, Department of Neurosurgery, Zagreb 1,2,3Bosnia and Herzegovina 4Croatia

Renewable energy systems are becoming a topic of great interest and investment in the world. In recent years wind power generation has experienced a very fast development in the whole world. For planning and successful implementations of good wind power plant projects, wind potential measurements are required. In these projects, of great importance is the effective choice of the micro location for wind potential measurements, installation of the measurement station with the appropriate measuring equipment, its maintenance and analysis of the gained data on wind potential characteristics. In this paper, a wavelet transform has been applied to analyze the wind speed data in the context of insight in the characteristics of the wind and the selection of suitable locations that could be the subject of a wind farm construction. This approach shows that it can be a useful tool in investigation of wind potential. Keywords—Wind potential, Wind speed data, Wavelet transform.

— Low frequency power oscillations may be triggered by many events in the system. Most oscillations are damped by the system, but undamped oscillations can lead to system collapse. Oscillations develop as a result of rotor acceleration/deceleration following a change in active power transfer from a generator. Like the operations limits, the monitoring of power system oscillating modes is a relevant aspect of power system operation and control. Unprevented low-frequency power swings can be cause of cascading outages that can rapidly extend effect on wide region. On this regard, a Wide Area Monitoring, Protection and Control Systems (WAMPCS) help in detecting such phenomena and assess power system dynamics security. The monitoring of power system electromechanical oscillations is very important in the frame of modern power system management and control. In first part, this paper compares the different technique for identification of power system oscillations. Second part analyzes possible identification some power system dynamics behaviors Using Wide Area Monitoring Systems (WAMS) based on Phasor Measurement Units (PMUs) and wavelet technique.

In this paper, a wavelet-based neural network (WNN) classifier for recognizing EEG signals is implemented and tested under three sets EEG signals (healthy subjects, patients with epilepsy and patients with epileptic syndrome during the seizure). First, the Discrete Wavelet Transform (DWT) with the Multi-Resolution Analysis (MRA) is applied to decompose EEG signal at resolution levels of the components of the EEG signal (delta, theta, alpha, beta and gamma) and the Parsevals theorem are employed to extract the percentage distribution of energy features of the EEG signal at different resolution levels. Second, the neural network (NN) classifies these extracted features to identify the EEGs type according to the percentage distribution of energy features. The performance of the proposed algorithm has been evaluated using in total 300 EEG signals. The results showed that the proposed classifier has the ability of recognizing and classifying EEG signals efficiently.

Background: Patients with perforative peritonitis are among the most complex cases encountered in surgical practice. Early prognostic evaluation of these patients is desirable in order to make the correct therapeutic plan, selecting highly risky patients for less aggressive surgical procedures. Prospective evaluation of different prognostic scoring systems was performed in order to assess the possibility of prediction of outcome in these patients. Patients and methods: The prospective study of 145 patients with perforative peritonitis was performed. The main outcome of this study was peritonitis-related death. Variables necessary for calculation of the scoring systems were recorded at the initial admission to the hospital (during the first 24 hours) and the third and seventh day of hospitalization, except Mannheim Peritonitis Index, which was calculated during the first 24 hours after hospitalization, i.e. during laparatomy. Sensitivity and specificity are graphically shown for the different values of cut-off points. Results: ROC curve for TISS -28 and APACHE II is significantly more accurate in comparison with other scores. The area under the curve for the first postoperative day was 0.87 for TISS-28 score, 0.86 for APACHE II score, 0.83 for MOF, 0.83 for SAPS I, 0.72 for MPI score, 0.70 for Sepsis score. In addition, this discriminatory ability remained on the third and seventh postoperative day as well. The highest rate of correlation between the observed and the expected mortality rate was in APACHE II system, for the first (Kendall’s τ correlation 0.964) and the third (Kendall’s τ correlation 0.8l0) day. There was a decrease in the rate of correlation on the seventh day for all scoring systems except for MOF score. Conclusion: APACHE II is better in prediction of the outcome to other tested scoring systems.