Introduction: The introduction of hybrid imaging systems such as Single Photon Emission Computed Tomography/Computed Tomography (SPECT/CT) has completely changed the scanning procedure of conventional diagnostic nuclear medicine protocols. Modern bone scintigraphy protocols include SUV quanitification and Whole Body (WB) SPECT/CT scanning modality. The major limitation of these new technologies is relatively long scanning time. New detector systems with modern reconstruction softwares have been developed for fast scanning SPECT protocolos. These new technologies can produce images of reduced acquisition with same quality as full scanning acquisition. As a result new studies suggest that planar WB scintigraphy should be replaced with WB SPECT/CT. Methods: One hundred oncology patients performed SPECT/CT as a part as their clinical follow-up. Three different scanning and three reconstruction protocols have been evaluated. Two nuclear medicine physicians evaluated with Likert scale image sharpness, lesion visibility, and lesion background detectability. The overall image quality was determined as the sum of these three parameters. Results: In terms of scan duration reduction on image quality, Volumetrix Evolution for Bone performed during ultra-fast SPECT acquisition achieved the highest score, which is superior compared to the standard SPECT acquisition protocol. The overall image quality was the best with the Volumetrix MI Evolution for Bone protocol for ultra-fast acquisition Conclusion: The Evolution for Bone protocol for ultra-fast acquisition showed best results compared to other protocols. The adoption of new acquisition SPECT protocol may offer more comfortable exams, resulting in higher patient satisfaction. The implementation of this new protocol can lead to an improvement in SPECT sensitivity, primarily due to the reduction of SPECT motion artifacts.

Introduction: Computed tomography angiography (CTA) represents the gold standard as a method for the diagnosis of carotid artery diseases. The current topic is the use of CTA for the evaluation of carotid arteries with a reduction in the dose of contrast agent and dose of ionizing radiation, which, with adequate preparation, would enable the use of this method in some risk groups. The aim of this study was to evaluate the feasibility and image quality of a new low-dose CTA protocol in comparison with a standard protocol. Methods: Forty patients with recumbent ischemic stroke were included in the study, twenty of whom underwent lowdose CTA, and the remaining twenty underwent a standard CTA protocol of the carotid arteries. Results: No significant difference was found between the mean values of CT number (Hounsfield unit), signal-to-noise ratio, contrast-to-noise ratio, and subjective assessment of image quality in the comparison of the control and experimental groups. CT dose index, volume, and dose length product were significantly lower in patients who underwent lowdose carotid CTA. There was no significant difference in the degree of carotid stenosis between color Doppler and CTA. Conclusion: The use of the low-dose protocol for carotid CTA allows the application of this method in risk groups, in which it was previously not possible to perform, with the same image quality in comparison with the standard protocol.

Introduction: The use of the Internet is becoming increasingly important in enabling children and adults to fully participate in society, whether it is learning new skills or connecting with friends and family. Consequently, children's opportunities are increasingly dependent on the Internet. The advance of technological innovations has resulted in more and more ICT devices being available to children, contributing to the deterioration of children and adolescents' health. Methods: The study was designed as an epidemiological, cross-sectional, descriptive-analytical, comparative study. The study was conducted from October 18, 2021, to January 16, 2022, using an online questionnaire accessible through the Microsoft Forms platform. Respondents were able to access the questionnaire via a link or QR code located on the child's consent form for participation in the study, which was previously signed by a parent/guardian. Results: The results of the study showed that school-age children were the most frequent users of smartphones and watches TV, with male respondents spending more time using almost all ICT devices, with the exception of tablets, which were used more frequently by female respondents. The analysis of pain intensity in the use of information and communication technologies revealed that respondents most frequently experienced mild pain, especially in the neck/shoulders and lower extremities. The frequency of eye problems after using ICT devices was found to be occasional, with the most pronounced symptoms being fatigue, tearing, and eyestrain, as well as headaches in one in five respondents. Conclusion: Increasing frequency of ICT device use was associated with higher pain intensity in all anatomic regions. A 1-hour increase in weekly ICT device use also increased the likelihood of pain intensity in all anatomic regions, including eye symptoms and headaches. High exposure to ICT is of concern because it leads to adverse health outcomes for children.

Background: Radiotherapy is one of the primary treatment options in cancer management, together with surgery and chemotherapy. Radiation therapy is technologically complex discipline involving professionals with various specialties, and using high energy radiation in treatment of wide range of different cancer types. Technical complexity, increasing number of patients, large workload, and delivery of radiation therapy treatment with lack of human, technical and financial resources in low and middle income countries creates environment with great potential to develop incidents. Emerging need of modern radiation therapy is to develop preventive approach to risk management i to improve the patient safety. Objective: The objective of this research is to identify and assess risk associated with radiation therapy practice in Bosnia and Herzegovina. Methods: An anonymous, voluntary electronic on-line radiation therapy incident reporting system (IRS) was created. IRS consists of four sections containing questions about working environment, incident occurrence, root causes and contributing factors, and incident severity assessment. Data collected using IRS were used to create taxonomy of incidents in radiation therapy. Risk assessment was made using Risk Matrix method. Research was made using the data collected from first 60 incidents reported to IRS. Results: Based on probability and frequency of incident occurrence and severity of consequences, it was assessed that 41.7% of incidents had low risk level (L), 50% of incidents had moderate risk level (M), and 8.3% of incidents had high risk level (H). Radiation therapy risk profile based on risk assessment results clearly shows that incidents with low frequency, low occurrence probability, but high consequences severity level have highest level of risk. Conclusion: The results of this research confirm that the electronic on-line radiation therapy IRS allows the identification and classification of the most significant risk factors in radiotherapy and prevention of serious incidents occurrence.

Introduction: Fetal central nervous system (CNS) anomalies are among the most severe and common anomalies, with an incidence of 1: 100 to 1: 500 in newborns. Depending on the type of anomaly, the diagnosis can only be made at specifi c periods of pregnancy. The prenatal ultrasound (US) is an eff ective primary imaging modality for depicting these anomalies, and magnetic resonance imaging (MRI) is a method that provides useful confi rmation and resolves any doubts regarding the diagnosis made on prenatal ultrasound. In situations where ultrasound examination is diffi cult, fetal MRI can provide superior information owing to its many advantages. The aim of this study was to determine the importance of prenatal MRI in making an accurate diagnosis and assessment of fetal CNS anomalies after neurosonographic doubt and in detecting additional anomalies that might have been overlooked on ultrasound, which infl uences clinical decision making and anomaly outcomes. Material and methods: For this research, which was designed as a systematic review of the primary scientifi c research literature, numerous articles were used, i.e.17 scientifi c research papers, published in relevant scientifi c research online databases such as PubMed, Medline, Google Scholar, and the same were published in English in the period from 2015 to 2021. Results: From the assessment of the quality of studies with a cohort design, most studies used in this systematic review are high-quality studies (11 in total) and a smaller number are medium-quality studies (6 in total). Out of 575 cases, MRI confi rmed the ultrasound diagnosis and agreed with it in 59.8% of cases, while in 20.2% of cases, it changed the diagnosis, i.e., in 16.5%, it rejected the ultrasound diagnosis. Additional anomalies detected only on MRI occurred in 236/1225 cases, which totals 19.3% of additional anomalies. Termination of pregnancy was reported in 82/317 cases, accounting for 25.9%, while in 176 cases, the pregnancy continued. A total of 11 cases of neonatal death were reported, and the number of stillbirths or deaths after birth was reported in 8 cases. Conclusion: MRI using T2W SSFSE sequences in 3 planes, T1W and DWI in the axial plane, is a complementary modality to prenatal ultrasound in making an accurate diagnosis and assessment of CNS anomalies and detecting associated anomalies previously overlooked on ultrasound. Keywords: fetal magnetic resonance imaging, fetal neurosonography, fetal central nervous system anomalies, prenatal diagnosis.

Abstract Introduction: Pulmonary embolism is still a challenge in diagnosis due to its variable and nonspecific symptoms. Computed tomography and ventilation/perfusion scanning are the modalities most commonly used in the diagnosis of pulmonary embolism, and both modalities have their advantages and disadvantages. One of the most important factors in the assessment and localization of pulmonary embolism is the diagnostic accuracy of these modalities, which serves to model different diagnostic strategies in the diagnosis of pulmonary embolism. Material and methods: The research was conducted as a review of professional literature available in scientific research databases. A selection of 20 professional papers was made, based on which an analysis was conducted and a database was formed. Criteria for inclusion in the research were scientific research papers that report on the sensitivity and specificity of diagnostic modalities of CT and V/P scanning as well as the results of diagnostic tests based on which the comparison of data from two modalities determined a diagnostically more accurate modality. Results: Sensitivity of 91.89% and specificity of 98.86% and diagnostic accuracy of 94.83% were determined in the case of computed tomography. Sensitivity of 90.58% and specificity of 98.33% and diagnostic accuracy of 96.43% were determined for the ventilation perfusion scanning method. We can conclude that the application of ventilation/perfusion scanning in the diagnosis of pulmonary embolism is a little more accurate compared to computed tomography. Conclusion: Ventilation/perfusion lung scanning will more accurately identify healthy individuals while on the other hand we can conclude that computed tomography is more accurate in diagnosing embolism in sick individuals. . Given that this difference between the two modalities is very small, the question is whether it is statistically significant at all. We can conclude that both diagnostic procedures have a high level of accuracy.

Background: MRI techniques of the lumbar spine have not provided data on the effect of gravity on the spine and on the relationship of anatomic structures during its action. Because conventional MRI examinations of the spine are usually performed in the supine position these are often exacerbated by standing upright and are not evident in the supine position the loading conditions differ from those known to cause symptoms in patients with lumbar instability. Axial loading imaging may improve diagnostics in the clinical management of LBP and lead to appropriate treatment decisions. Objective: The aim of this study is to determine the significance of alMRI in detecting the morphologic changes of the lumbar spine caused by axial loading and to compare it with conventional MRI images of the lumbar spine without loading. Methods: The study was conducted as a prospective, descriptive clinical trial. Imaging was performed with a MRI 1.5 T in the head-first supine position. Imaging was performed in two acts: without load and under load. Loading for alMRI was performed with the DynaWell L-Spine device. The onset of loading was 10 minutes before the start of alMRI. The loading continued throughout the imaging procedure. The height of the IV, AP and LL diameters of IV, IV disk surface area, DSCA and width of the IV foraminas before and under load was measured. Results: After evaluating the changes in the height and size of the lumbar disks, the size of the DSCA, and the narrowing of the intervertebral foramina significant differences were found between the images before and after axial loading. Conclusion: alMRI provides information on morphological changes of all segments of the lumbar spine. This data represents significant information that can lead to more accurate and effective treatment of LBP.

Contouring, planning and dose calculation in treatment planning systems (TPS) are based on computedtomography (CT) images. Therefore, it is important to have developed, optimized and adapted scanning protocolsfor specific anatomic regions and special radiotherapy modalities such as stereotactic radiosurgery (SRS). The aimof this study was to determine influence of tube voltage, field of view size (FOV) and reconstruction kernels on CTnumbers and the resulting radiotherapy (RT) dose calculation.This study was performed at Clinic of Oncology, Clinical Center University of Sarajevo. Verification electrondensity and CT number values was performed using CIRS Thorax 002LFC phantom, while anthropomorphic CIRS038 phantom for stereotactic end-to-end verification was used for the purpose of dose plan calculation analysis withlarge bore CT simulator Canon Aquillion LB.The significant correlation between the tube voltage and the measuredvalues of CT numbers is significant for all materials (p < 0.05), except for water (p = 0.310). No significantcorrelation between FOV and obtained values of CT numbers was found in any of the evaluated tissue equivalentmaterials. Evaluating the impact of reconstruction kernels on Hounsfield units (HU), significant deviations werefound for the FC62, FC68 and FC07 reconstruction kernels. Also, analyzing the influence of reconstruction kernelson the RT dose calculation, the extreme values are associated with Dmin/D in PTV for kernels FC41 and FC68, wheredeviations from the values obtained using the baseline scanning parameters were -1.3% and -1.9%. For deviation of1 HU in muscle tissue of CIRS 002LFC, the calculated Dmin/D in PTV of CIRS STEEV phantom will reduce by0.79%. Similarly, the reduction of D₉₈ and D₂ would be 6.8 cGy and 3.03 cGy for 1 HU, respectively. Change of thereconstruction kernels caused differences of 0.4% in Dmin/D calculation in clinical target volume (CTV).CT scanning and reconstruction parameters may affect Hounsfield units, which could have an impact on dosecalculations in RT plan. Hence, it is recommended to standardize the scanning protocol used in calibration curvegeneration for TPS. One should avoid use of different tube voltages and kernels, while according to this study, thechange of FOV will have no impact on dose calculations

Background: The use of resolution recovery (RR) in bone and myocardial perfusion imaging is becoming increasingly popular in nuclear medicine departments. RR produces reconstructed images that show improved spatial resolution and signal-to-noise ratio compared with conventional single-photon emission computed tomography (SPECT) images. Objective: To evaluate the impact of the ordered subset expectation maximization (OSEM) RR modality on preserving noise, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) for short SPECT acquisition. Methods: This prospective study was conducted on 80 patients. Full SPECT acquisition was performed as a standardized protocol, while reduced acquisition was achieved with the Poisson resampling method. Noise, SNR, and CNR were measured for different reconstruction parameters for the same image levels. The impact of surface area and body mass index was also measured for the same reconstruction parameters. Results: The results show significantly higher SNR and CNR for the Evolution for Bone protocol compared to the other two reconstruction protocols for full and reduced SPECT acquisition. With the shortening of the SPECT acquisition, an increase in the value of noise was recorded. SNR and CNR decreased with the reduction in SPECT acquisition. Conclusion: The Evolution for Bone protocol for all three analyzed acquisition protocols had the lowest noise values. The highest SNR and CNR were recorded in the Evolution for Bone protocol for the three acquisition protocols and SPECT acquisition time can be reduced from 20 to 10 min for bone SPECT.

Abstract Objectives  The aim of the study was to analyze the occurrence of stress on teeth with abfraction lesions restored with six different restorative materials, and by introducing the tensile strength parameters to calculate the safety factor of the material under the load (ratio between the strength of the material and the maximum stress). Materials and Methods  Three-dimensional models of the mandibular premolar are created from a microcomputed tomography images. An abfraction lesion is modeled on the tooth. The stress of the dental tissues and six restorative materials under functional and nonfunctional occlusal loading of 200 (N) are analyzed by finite element method. Statistical Analysis  CTAn program 1.10 and ANSYS Workbench (version 14.0) were used for analysis. Results are presented in von Mises stress. Results  Oblique loads caused ≈ four times higher stress in restorative materials than the axial ones. It is noticeable that high values of von Mises stress are measured at the bottom of the sharp lesion, even up to 240 MPa, that are significantly reduced after the restoration. The highest stresses at the restorative material are present at the lower (gingival) margin of the restoration. The highest stresses under both types of loads are measured in nanohybrid composite (Tetric EvoCeram, Ivoclar Vivadent). The lowest values of the stress are measured in the flowable composite (Tetric Flow, Ivoclar Vivadent), but at the same time, the highest value of the stress is measured in the surrounding dental tissues on the tooth restored with the flowable composite. The microhybrid composite (Herculite XR, Kerr), with the highest safety factor, is the material that best withstands the stresses it is exposed to. The obtained safety factor did not exceed the critical limit, except for the glass ionomer cement, with the safety factor lower than 1. Conclusion  The type of tooth loading has the greatest influence on the intensity of stress. The value of the obtained stresses in the restorative material and dental tissues differ due to the different mechanical properties of the materials. Restoration of noncarious lesions significantly reduces extremely high stress values at their bottom.

Objective: Determination of the importance of computed tomography in the diagnosis of pulmonary infection caused by COVID-19 infection, to compare computed tomography and computed tomography in detecting pathological changes caused by COVID-19 infection, and to prove the sensitivity and specificity of computed tomography. Method: The results of prospective and retrospective studies were used to write this review article, by systematic selection on Internet scientific databases: PubMed, Google Scholar, Crossref. Results: Based on a systematic review of the literature, it was established that chest CR is the first diagnostic method of choice, due to its wide availability. Conclusion: CT is a highly sensitive diagnostic method, and is recommended for more severe stages of the disease and accelerated exacerbation of the disease, in patients with slow regression of radiographic findings and in patients recovering from COVID-19 with impaired lung function.

Background: Spinal hydatid cyst represents a rare form of parasitic infection and is a serious clinical condition that can cause severe consequences such as paraplegia, tetraplegia, or radiculopathy. Objective: In this article, we report a case of a rare lumbar hydatid cyst in a 50-year-old man. Case presentation: We report a rare case of primary lumbar hydatid cyst. Recurrence was diagnosed by magnetic resonance imaging (MRI), although the patient had surgery and was taking albendazole regularly. Conclusion: MRI imaging should be used to diagnose the disease. Complete resection is the only treatment that can prevent the lesion from invading adjacent tissues. Regardless of all measures, the disease has a high recurrence rate.

Introduction: Axial-loaded magnetic resonance imaging (MRI), which can simulate an upright position of the patient may cause a significant reduction of the dural sac cross-sectional area (DCSA) compared with standard MRI, thus providing valuable information in the assessment of the lumbar spinal canal. The purpose of this study was to investigate excessiveness of the change in DCSA and depth of lateral recesses (DLRs) before and after axial-loaded imaging in relation to body mass index (BMI) of the subjects.Methods: Twenty patients were scanned to evaluate DCSA and DLR at three consecutive lumbar spine intervertebral disc levels (L3/4, L4/5, and L5/S1) on conventional-recumbent MRI, and after axial loading were applied.Results: Axial-loaded MRI demonstrates a significant difference of DSCA in comparison to conventional MRI. Furthermore, results show a significant correlation between the DCSA and BMI on level L3/L4, both before and after axial loading MRI. With axial loading, there is a reduction of DSCA of 12.2%, 12.1%, and 2.1% at the levels L3/L4, L4/L5, and L5/S1, respectively. After axial loading has been applied, the depth of the neural foramen has been reduced by an average of 10.1%.Conclusion: Axial-loaded MRI reduces DCSA and DLRs in comparison to standard MRI. Information obtained in this way may be useful to explain the patient’s symptomatology and may provide an additional insight that can influence the treatment decision plan accordingly.