Integrated Flood Hazard Assessment using GIS and 2D Hydraulic Modelling: A Case Study of Sanica River, Bosnia and Herzegovina
Flood extent maps (FEM) and flood hazard maps (FHM) serve as legal instruments for spatial planning, decision-making, strategic flood risk planning, and public awareness, supporting sustainable and safe land use along the river corridor. This study aims to improve existing FEM and create FHM for the Sanica river, prone to frequent flooding. The existing FEM were developed using a 1D HEC-RAS model under steady-flow conditions, applying a single uniform Manning roughness coefficient along the entire river reach. The study presents the first application of an unsteady 2D HEC-RAS model along Sanica river, integrating LiDAR-based topography and updated hydrological data to derive FEM and FEH for common return periods. The final 2D hydraulic model was selected through calibration of seven variants of the Manning roughness coefficient, three lumped and four distributed, with the optimal configuration identified based on three goodness-of-fit measures. The comparison of 1D and 2D FEM shows close agreement in morphologically confined canyon reaches, while significant differences occur in river sections with floodplain inundation and dominant 2D flow. These results indicate that model dimensionality can be selected based on reach-scale morphology, enabling the use of 1D models in canyon sections to reduce computational time, while applying 2D models only where complex flow dynamics are present within the Sanica river study area.