Analysis of the influence of the quantity and position of the basalt mesh in the plywood construction on the bending strength
Plywood is a wood-based material that, due to its good properties, has found applications in many areas of the wood industry, transport, and construction. Plywood is fabricated from multiple layers of veneer glued together with the grain direction of each layer of veneer perpendicular to that of the adjacent layers. In order to improve primarily mechanical properties, plywood is reinforced with various fibers, both natural and synthetic. Basalt is used in various forms as a material for reinforcing composite materials. Basalt mesh is primarily used in construction to improve the properties of wall and road structures. In order to determine the possibility of using basalt mesh in the production of wood-based composite materials, plywood reinforced with basalt mesh was produced in laboratory conditions. One, or two, or three basalt meshes were placed in different positions in the panel construction. The manufactured plywood reinforced with basal mesh was tested in accordance with EN 310. The paper presents the results of the bending strength test depending on the quantity and position of the basal mesh in the plywood construction.