LAB-SCALE INVESTIGATION OF MIDDLE-BOSNIA COALS TO ACHIEVE HIGH-EFFICIENT AND CLEAN COMBUSTION TECHNOLOGY

This paper describes full lab-scale investigation of Middle-Bosnia coals launched to support selection an appropriate combustion technology and to support opti- mization of the boiler design. Tested mix of Middle-Bosnia brown coals is pro- jected coal for new co-generation power plant Kakanj Unit 8 (300-450 MWe), EP B&H electricity utility. The basic coal blend consisting of the coals Ka- kanj:Breza:Zenica at approximate mass ratio of 70:20:10 is low grade brown coal with very high percentage of ash - over 40%. Testing that coal in circulated fluidized bed combustion technique, performed at Ruhr-University Bohum and Doosan Lentjes GmbH, has shown its inconveniency for fluidized bed combustion technology, primarily due to the agglomeration problems. Tests of these coals in PFC (pulverized fuel combustion) technology have been performed in referent laboratory at Faculty of Mechanical Engineering of Sarajevo University, on a lab-scale PFC furnace, to provide reliable data for further analysis. The PFC tests results are fitted well with previously obtained results of the burning similar Bosnian coal blends in the PFC dry bottom furnace technique. Combination of the coals shares, the process temperature and the air combustion distribution for the lowest NOx and SO2 emissions was found in this work, provided that combus- tion efficiency and CO emissions are within very strict criteria, considering spe- cific settlement of lab-scale furnace. Sustainability assessment based on calcula- tion economic and environmental indicators, in combination with Low Cost Planning method, is used for optimization the power plant design. The results of the full lab-scale investigation will help in selection optimal Boiler design, to achieve sustainable energy system with high-efficient and clean combustion tech- nology applied for given coals.