Numerical analysis of wood beam bending with verification of breaking force
The work represents the continuation of the research of the maximum bending stress force of a wooden beam up to the moment of failure, which is defined experimentally and with a corresponding mathematical model. The goal was to confirm the accuracy of the mathematical model of the breaking force using numerical simulation and the Solid Works software. Five different types of wood and five different beam thicknesses were used as input parameters whose influence was monitored trough the simulation. The stress deformation state and deflection for the calculated fracture forces were analysed separately for each variant. The breaking force model, which is defined depending on the density of the wood and the thickness of the board, proved to be adequate for defining the maximum stresses and deflections when bending beams.